How Do I Use My EcoSmart Tankless Water Heater: A Quick Guide

Tankless water heaters are an excellent option for a home because they save electricity and are environmentally friendly. This article will show you how do I use my EcoSmart tankless water heater quickly and easily.

A tankless water heater may be the correct choice if you seek a more efficient way to heat your water. If you’re seeking a quick and easy how do I use my EcoSmart tankless water heater guidance, look no further. You’ve arrived at the right location! This blog post will walk you through all you need to know about getting the most out of your new water heater.

First and foremost, let’s review the fundamentals of a tankless water heater‘s operation. How should Eco smart water heaters be installed? A tankless water heater, unlike a standard water heater, heats water on demand as you require it, rather than storing it in a big tank. It means you’ll never run out of hot water and always have an unlimited supply!

A Tankless Electric Water Heater Is A Type Of Electric Water Heater That Does Not Have A Storage Tank. What’s More, How Does It Work?

When purchasing a water heater, it’s critical to evaluate your needs and determine what will work best for you and your family. A standard water heater will fill its tank with water, heat it, and then keep it warm until it is needed. On the other hand, a tankless water heater heats water on demand as it continuously runs through the unit while in use, bringing in water on demand.

Unlike a traditional heater, the tankless heater device does not have a tank to hold all the hot water, saving you time and money if your water heater breaks down unexpectedly. Because many of these heaters may be hung on the wall, installing a tankless electric water heater is often easier and takes little to no floor space.

While tankless electric water heaters are much more expensive than traditional water heaters, they have numerous advantages:

  1. Durable – Material is of a higher quality.
  2. There is no water stored, which eliminates corrosion and enormous water leaks.
  3. Depending on their size, you can utilize them to generate as much hot water as you need without interruption.
  4. Tankless water heaters can save up to 60% more energy than traditional heaters.
  5. It takes up less room than a conventional water heater.
  6. It is less difficult to fix a tankless electric water heater.

Ecosmart Tankless Water Heater Installation Instructions

How Do I Use My EcoSmart Tankless Water Heater

The EcoSmart tankless water heater is an excellent choice if you’re considering upgrading to a tankless water heater. We’ll go over how do I use my EcoSmart tankless water heater in this fast guide so you can take advantage of all the advantages of on-demand hot water.

1 – Prior To Installation

Before installing and using this product, please read these instructions properly. Failure to comply with instructions may result in property damage, significant personal harm, or death. You agree to the manufacturer’s warranty conditions when installing this device.

2- Choosing A Place to Install

This EcoSmart tankless water heater is only meant to be put indoors. It is possible to install your device outside if it is kept protected from rain, splashing water, direct sunlight, and debris.

You should not install this device in an area where it will be exposed to freezing temperatures.

Your warranty may not cover severe damage caused by the freezing of water in your tankless water heater.

Avoid putting the water heater in a difficult-to-reach place.

Ensure the water heater and hot water outlet pipe are out of reach of youngsters so they can’t mess with the temperature controls or get hurt by touching the hot water outlet line. The exit water pipe can become extremely hot.

This product doesn’t need to be vented.

Avoid placing your tankless water heater in an area where it will be exposed to high levels of humidity, moisture, or dust or where it will be splashed with water or other liquids. Installing beneath water pipes or air conditioning lines that could leak or condense moisture and drip onto the heater is not a good idea. Do not use the electrical boxes listed above.

Tread carefully

The water heater should not be installed where a leak could cause harm to the area around it or the structure’s lower floors. If such situations cannot be avoided, an appropriate catch pan with proper drainage should be built beneath the water heater.

3- Water Heater Installation

Using the built-in installation brackets on either side of the heater, fasten your tankless water heater to the mounting surface with four screws (minimum one inch long). Before tightening the screws, double-check that the mounting surface is firm and secure and that the unit is level. We recommend that this product be put upright for simplicity of installation and service, with the inlet and outlet water connections on the bottom of the unit for the ECO 18, ECO 24, ECO 27, and ECO 36, and on the left and right sides of the unit for the ECO 8 and ECO 11.

  • Twelve inches above and below the heater is recommended as clearance.
  • 6 inches in front of the heater and 6 inches on all sides

Strongly advice

Keep flammable things a minimum of 24 inches away from your water heater and the hot water outflow line.

Plumbing Instructions for Installation

Plumbing Instructions for Installation

Please pay close attention to the plumbing instructions. Installing these EcoSmart devices should be done by a licensed and trained plumber who observes all nationwide.

Instructions for Assembly

STEP 1:

When facing the unit, connect the hot water line to the outlet on the left side of the heater. Connect the cold water line to the right side of the water heater’s input when facing the unit.

STEP 2:

Open many hot water taps and allow water to stream through the water heater for at least 2 to 3 minutes after tightening both connections at the water heater. This procedure removes all air from the water pipes and must be completed before turning on the unit’s power. Failure to complete this step may cause the heating elements to be permanently damaged.

It is critical to turn off the water heater and purge the air out of the lines before allowing the unit to power up if any work on the water heater or the home’s plumbing system is undertaken that may introduce air into the plumbing pipes.

STEP 3:

Check for leaks in all connections, unions, and the pressure release valve (if applicable).

The water heater has been installed and is now ready for use! Complete the setup by following the General Operating Instructions. We strongly advise that this be done in the presence of the homeowner.

Ecosmart Tankless Water Heater Instructions

Now that we’ve covered the essentials let’s dive into the nitty-gritty of using your new EcoSmart tankless water heater. How do I use my EcoSmart tankless water heater? But first, inspect all of the components. One of the following units should be included in the contents of your box:

1 – ECO 8 – The Eco 8 costs $259 and up on Amazon.

2 – ECO 11 – The Eco 11 costs $223 and up on Amazon.

3 – ECO 18 – The Eco 18 may be found on Amazon for $ 402 and above. BUY ON AMAZON

ECO 18

4 – ECO 24 – The Eco 24 may be found on Amazon for $ 502 and above. BUY ON AMAZON

ECO 24

5 – ECO 27 – The Eco 27 can be found on Amazon for $ 904 and more. BUY ON AMAZON

6 – ECO 36 – The Eco 36 can be found on Amazon for $ 531 and above. BUY ON AMAZON

ECO 36

Set the desired temperature on the control panel to begin. Once you’ve done that, the machine will start heating the water and keep doing so until the temperature is reached. It’s crucial to remember that there’s a slight delay between turning on your unit and the hot water starting to flow. It is normal because the device needs time to heat the water.

The EcoSmart tankless water heater is a beautiful alternative if you’re considering upgrading to a tankless water heater. We’ll talk about it here. How do I use my EcoSmart tankless water heater to get the most out of on-demand hot water?

  1. First, use the provided mounting bracket and screws to hang the device on the wall.
  2. Then, connect the cold and hot water inlet and output pipes to the proper valves on your unit.
  3. Once everything is in place, open the cold water shut-off valve and push the power button on your EcoSmart tankless water heater to switch it on.
  4. It’s time to use the control panel to establish your preferred temperature.
  5. The current water temperature will be displayed on the LED display, allowing you to make any necessary modifications.
  6. When you’re done, hit the power button once again to start heating the water.
  7. You can use hot water usually after your EcoSmart tankless water heater is up and running!

Whether you’re having a shower, doing laundry, or cleaning dishes, you won’t have to worry about running out of hot water. You might consider getting a tankless water heater to save money on your energy bill and lessen your carbon impact. Tankless water heaters heat water only when you need it. Therefore they utilize energy only when you need it. Compared to a standard tank water heater, this can save you a lot of money on your energy cost.

What Should You Think About Before Purchasing An Ecosmart Tankless Water Heater?

1 – Price

The Eco 27 is available from several stores, ranging from $475 to over $1,000.

2 – Applications

This type can produce enough hot water per minute for a small home or office. It is the perfect size for low-traffic areas like apartments and condos. The model isn’t suitable for huge residences or structures.

3 – Comparison

Compared to other electric tankless water heaters, the Eco 27 is less expensive while delivering comparable or superior overall performance. Some competitors’ devices were significantly more expensive, and a couple didn’t provide an electric option for their tankless units, instead opting for natural gas or propane.

Can You Use The Ecosmart Tankless Water Heater If You Live In A Colder Climate?

The EcoSmart is best suited to moderate to warm climates. But what if you live in a region with lower temperatures throughout the year? Is it still usable?

Yes, however, there are certain restrictions. For example, you may utilize this EcoSmart tankless water heater in your home for low-flow applications like sinks. EcoSmart, on the other hand, recommends using one of their other devices for high-flow applications like showers and baths.

One of EcoSmart ECO11’s drawbacks is that it requires an external temperature of at least 67 degrees. Below that, the device begins to drop the maximum water temperature and reduce the flow rate.

Conclusion

Using an EcoSmart tankless water heater is a terrific way to conserve energy and money. You can save money and get hot water on demand by following simple tips.

We hope that this quick guide on how do I use my EcoSmart tankless water heater proved helpful in laying out the fundamentals of utilizing your EcoSmart tankless water heater. Always refer to your owner’s handbook for particular information on your model.

Frequently Asked Questions

A: If you have a tankless gas unit and no hot water when only one hot water appliance is running, check that: You’ve paid your gas bill (without a consistent gas supply, your tankless water heater won’t be able to heat water!) Make sure your water heater vent isn’t blocked (these are usually found on the roof).

A: The E5 error code indicates an issue with the Pressure Switch, which might be caused by a motor failure or a low power supply voltage. If the problem persists although the power supply is within the required range, try resetting your heater by draining the unit entirely of water. Turn off the gas valve.

A: You can put your tankless water heater almost anyplace! Because of its tiny size, your water heater can be installed in various small spaces, such as closets, under sinks, pantries, and stair storage areas.

Leave a Comment